When it comes to enjoying music, podcasts, or any audio content, the sound quality and functionality of your earbuds are paramount. The Beats Studio Buds, known for their active noise cancellation, transparency mode, and spatial audio, has been a popular choice among both Apple and Android users. However, a common issue some users face is one side of their Beats Studio Buds not working. This article will explore the possible causes and provide troubleshooting steps to resolve this issue.
Let’s get started!
Identifying the Problem
The first thing to do when you encounter this issue is to determine whether the problem lies with the left earbud or the right earbud. Once you’ve identified the non-functioning side, you can begin to troubleshoot. It’s important to note that the issue could be related to hardware issues, a software issue, or even connectivity issues.
Troubleshooting Steps
- Check Battery Life: Ensure both earbuds have enough charge. A 5-minute charge can often give you enough battery life for a quick test.
- Update Firmware: Using the latest version of the Beats app, check for new firmware updates. Outdated firmware can sometimes cause one side to stop working.
- Reset Your Earbuds: Press and hold the system button on the charging case for 15 seconds or until the LED indicator flashes. This can resolve minor software glitches.
- Check Device Settings: On your iOS device or Android device, ensure that the audio balance is centered and that the Bluetooth connection is stable.
- Mono Mode: If you’re using mono mode, switch to stereo to ensure both earbuds are active.
- Clean Your Earbuds: Check the connector pin and charging case units for any debris that might be causing a connectivity issue.
How to Fix Beats Studio Buds One Side Not Working
Remove from Devices List
This issue can happen if you are using your Beats Studio buds with different devices.
Maybe one of these devices is interfering with your buds and not letting them pair properly with another device.
Therefore you should remove your Studio buds from all devices.
If you haven’t switched them across different devices. Then you should also remove them from your device list.
And then repair these buds with your device.
Hopefully, one bud that isn’t working will start working.
Reset Beats Studio Buds
Resetting Beats Studio Buds can also fix this issue. Because resetting removes any kind of software bug and buds will start working.
You can also find this on the Apple site that they said
If you have sound, Bluetooth, or charging issues with your earphones, you might want to reset them.
Here is how you can reset your Beats Studio Buds.
- Place both buds in the charging case and leave the charging case lid open.
- Press the system button of the charging case and hold it for 15 seconds.
- When the LED indicator on the charging case starts flashing the Red and White release system button.
- Now Beats Studio Buds are completely reset.
After resetting buds forget all previously paired devices. Therefore you have to now pair them with your device.
And check whether buds start working or not.
Restart Beats Studio Buds
If your Beats Studio Buds aren’t fixed by the above tips. Then you should try to fix them by restarting.
Or you can restart only one bud that is not working.
You can turn them off by pressing the Beats logo on each bud.
And also turn them on by pressing the same button.
Update Firmware of Beats Studio Buds
For proper functionality of your Beats Studio Buds, you have to keep updating the firmware of your buds and device.
If you have not updated the firmware of your Beats Studio Buds they can stop working.
Here is a guide on how you can update the firmware of your Beats Studio Buds on Android and iOS devices.
If you are using your earbuds with Android devices you can update the firmware with the Beats Updater app.
First, install the Beats Updater app and then check the notification tab.
Then follow the on-screen instructions to update the firmware.
If you are using them with iOS devices then you don’t need to update firmware actively.
However, you should check to make sure the firmware is updated or not.
You can check this by following the below steps.
- Pair your Beats Studio Buds with your device.
- Go to settings>General and then About.
- Scroll down and select your Beats Studio Buds.
- There you will be able to see the firmware version.
Clean Buds and Case
If one of your Beats Studio Buds is not working maybe it is not properly charging. As a result, it stops working.
Due to dirt and sweat, your buds can stop working. Therefore to resolve this issue you should clean the bud that isn’t working.
And pins of the charging case.
You should properly clean and dry the bud or both buds.
To clean buds you can use a toothbrush or tissue. You have to gently move tissue on the charging contacts of the bud.
Then clean the pins of the charging case with sandpaper.
After cleaning charge the earbuds and then pair them with your device to see whether they start working or not.
Damaged Beats Studio Buds
Like all other earbuds, Beats Studio Buds are made with little electronic circuits.
If these circuits are damaged then Beats Studio Buds won’t be able to work properly.
As a result, they will stop working.
Here are the common things that can damage your Beats Studio Buds.
- Dropping can easily damage your Beats Studio Buds.
- Using Beats Studio Buds in extreme heat and sunlight can damage them.
- Exposure to heat can damage the battery of the buds and charging case.
- Exposure to water can also damage them.
If one of the above things has been done with your buds then they are physically damaged.
If your Beats Studio Buds are physically damaged then the above tips will not work for you.
When to Seek Professional Help
If you’ve tried the above steps and your Beats Studio Buds are still not functioning correctly, it may be time to seek professional help. Contact Apple Support or visit an Apple Store for further assistance. They can help you determine if the issue is due to internal components or if you need a replacement.
Preventing Future Issues
To prevent future issues with your Beats Studio Buds:
- Regularly clean the external-facing microphones and charging contacts.
- Avoid exposing your earbuds to water despite their water resistance rating, as this can still lead to damage over time.
- Store your earbuds in the charging case when not in use to protect them from physical damage and keep the battery levels topped up.
Final Thoughts
The Beats Studio Buds offers a compact design, water resistance, and high-quality sound that many users love. While it can be frustrating when one side stops working, the good news is that there are several troubleshooting steps you can take before resorting to additional charges for repair or replacement. By following these steps, you can often get your earbuds back to providing the audio performance you expect, allowing you to enjoy your unique audio tracks and voice commands with ease.
If this problem isn’t solved, you should go to the Apple store or contact their support. You can also replace them if they are under warranty.
