Raycon earbuds are popular wireless earbuds that offer good sound quality, comfort, and battery life. However, some users may experience problems with their Raycon earbuds cutting out or losing connection. This can be frustrating and annoying, especially when you are listening to your favorite music or podcast.
If you are one of those users who are facing this issue, don’t worry. Some possible solutions can help you fix it. In this article, I will show you how to troubleshoot and resolve the problem of Raycon earbuds cutting out.
Why Do Raycon Earbuds Keep Cutting Out?
There are several possible reasons why your Raycon earbuds keep cutting out or losing connection. Some of the common causes are:
- Low battery: If your Raycon earbuds or their charging case are low on battery, they may not function properly or disconnect randomly. You should always keep your earbuds and their case fully charged to avoid this issue.
- Bluetooth interference: If there are other Bluetooth devices or wireless signals near your Raycon earbuds or your connected device, they may interfere with the Bluetooth connection and cause your earbuds to cut out. You should try to minimize the sources of interference or move away from them.
- Bluetooth range: If you move too far away from your connected device or put something between them, such as a wall or a door, you may lose the Bluetooth connection and cause your earbuds to cut out. You should always keep your earbuds within the Bluetooth range of your device, which is about 33 feet for Raycon earbuds.
- Improper pairing: If your Raycon earbuds are not properly paired with your device or have been paired with multiple devices, they may not work well or disconnect frequently. You should make sure that your earbuds are correctly paired with your device and delete any other devices from their Bluetooth list.
How to Fix Raycon Earbuds Keep Cutting Out?
Depending on the cause of the problem, there are different ways to fix Raycon earbuds cutting out. Here are some of the possible solutions that you can try:
- Restart earbuds: Sometimes, a simple restart can fix minor glitches and restore the normal function of your earbuds. To restart your Raycon earbuds, follow these steps:
- Turn off both earbuds by pressing and holding their power buttons for a few seconds.
- Place the earbuds in their charging case and close the lid.
- After 20 to 30 seconds, take out the earbuds from the case and turn them on.
- Reset earbuds: If restarting does not work, you may need to reset your Raycon earbuds to restore them to their factory settings. This can help clear any errors or conflicts that may cause your earbuds to cut out. To reset your Raycon earbuds, follow these steps:
- Turn off both earbuds by pressing and holding their power buttons for a few seconds.
- Delete your Raycon earbuds from the Bluetooth list of your device.
- Press and hold both earbuds’ buttons for more than 30 seconds until you see a red light flashing on both of them.
- Put the earbuds back in their case and take them out again after a few seconds.
- Repair earbuds: After resetting your Raycon earbuds, you need to re-pair them with your device. This can help establish a stable and secure connection between them. To re-pair your Raycon earbuds, follow these steps:
- Turn on both earbuds by pressing and holding their power buttons for a few seconds. They will automatically enter pairing mode and flash blue and red lights alternately.
- Turn on the Bluetooth function on your device and scan for available devices.
- Select “Raycon E25” or “Raycon E55” from the list of devices and confirm the pairing request.
- Once paired successfully, you will hear a voice prompt saying “Connected” on both earbuds.
- Charge earbuds: If your Raycon earbuds or their charging case are low on battery, they may not work properly or disconnect randomly. You should always keep your earbuds and their case fully charged to avoid this issue. To charge your Raycon earbuds, follow these steps:
- Plug the micro USB cable into the charging port on the back of the case.
- Plug the other end of the cable into a power source, such as a wall outlet or a computer.
- Place the earbuds in their case and close the lid. The LED lights on the case will indicate the charging status of the earbuds and the case.
- When fully charged, the LED lights on the case will turn off.
- Reduce interference: If there are other Bluetooth devices or wireless signals near your Raycon earbuds or your connected device, they may interfere with the Bluetooth connection and cause your earbuds to cut out. You should try to minimize the sources of interference or move away from them. Some of the common sources of interference are:
- Wi-Fi routers or modems
- Microwave ovens or cordless phones
- Other Bluetooth devices or headphones
- Metal objects or walls
- Stay within range: If you move too far away from your connected device or put something between them, such as a wall or a door, you may lose the Bluetooth connection and cause your earbuds to cut out. You should always keep your earbuds within the Bluetooth range of your device, which is about 33 feet for Raycon earbuds. You should also avoid putting your device in your pocket or bag, as this may weaken the signal.
Conclusion
Raycon earbuds are great wireless earbuds that offer good sound quality, comfort, and battery life. However, some users may experience problems with their Raycon earbuds cutting out or losing connection. This can be frustrating and annoying, especially when you are listening to your favorite music or podcast.
If you are one of those users who are facing this issue, don’t worry. Some possible solutions can help you fix it. In this article, I have shown you how to troubleshoot and resolve the problem of Raycon earbuds keep cutting out.