Skullcandy Sesh Evo are wireless earbuds that offer a great sound quality, a long battery life, and a comfortable fit. However, some users may encounter a problem where their earbuds are not charging properly. This can be frustrating, especially if you want to enjoy your music or podcasts without interruption. Fortunately, there are some simple steps you can take to fix this issue and get your earbuds back to working order.
How to Fix Skullcandy Sesh Evo Not Charging
The first thing you need to do is check the charging case. The charging case is where you store and charge your earbuds when they are not in use. If the case is not charged, it will not be able to charge your earbuds. To charge the case, you need to plug it into a power source using the included USB cable. You can also use any other compatible USB cable or charger. You should see a red LED light on the case when it is charging. When the case is fully charged, the light will turn green.
Next, you need to make sure that your earbuds are properly seated in the charging case. Sometimes, the earbuds may not be aligned with the charging contacts inside the case, which can prevent them from charging. To fix this, you need to gently press down on each earbud until you hear a click sound. This means that the earbuds are securely connected to the case. You should also see a red LED light on each earbud when they are charging. When the earbuds are fully charged, the light will turn green.
If these steps do not work, you may need to clean the charging contacts on both the earbuds and the case. Over time, dust and dirt may accumulate on the contacts, which can interfere with the charging process. To clean them, you can use a soft cloth or a cotton swab dipped in some rubbing alcohol. Gently wipe the contacts until they are clean and dry. Be careful not to use too much alcohol or water, as this may damage your earbuds or case.
Another possible solution is to reset your earbuds. Resetting your earbuds can help resolve any software issues that may be causing them not to charge.
To reset your earbuds, you need to follow these steps:
- Remove the earbuds from the case and manually power them off by touching and holding both buds for four seconds.
- Once both buds are off, touch and hold each bud for 10 seconds to completely reset them. This will power cycle them on and off again.
- Once both buds have gone through the power cycle, place them back in the case until both LEDs show red, and then pull them back out.
- Both buds will automatically power on and sync with each other. You will hear a tone to indicate that the sync was successful and only the left bud will flash red/blue.
- At this time, turn on your device’s Bluetooth and look for Sesh Evo in your list of available devices. Select it and follow any prompts that appear on your screen.
- Once successfully paired, you will hear a voice prompt that says “Connected”.
If none of these steps work, you may have a faulty or damaged earbud or case. In this case, you should contact Skullcandy customer support for further assistance. They may be able to offer you a replacement or a refund under their warranty policy.
FAQ
Why is sesh evo left earbud not working?
There could be several reasons why your Sesh Evo left earbud is not working. Some of the possible causes are:
- The earbud is not charged properly. You should check the charging case and the charging contacts to make sure they are clean and functioning. You should also see a red LED light on the earbud when it is charging, and a green light when it is fully charged.
- The earbud is not paired correctly. You should try to re-sync your earbuds by following the steps in the Skullcandy support page. You should also make sure that your device’s Bluetooth is on and that you select Sesh Evo from the available devices list.
- The earbud has a software issue. You should try to reset your earbuds by following the steps in the Skullcandy support page. You should also update your firmware and turn off any audio processing that may interfere with the sound quality.
Why my skullcandy sesh evo charging case not turning on?
One reason could be that the charging case is out of battery. You should check the battery level of the case by pressing the button on the back. If the LED flashes red, the case needs to be charged. To charge the case, you need to plug it into a power source using the included USB cable or any other compatible USB cable or charger. You should see a red LED light on the case when it is charging, and a green light when it is fully charged.
Another reason could be that the charging contacts on the case or the earbuds are dirty or damaged. This can prevent the case from charging or detecting the earbuds. To fix this, you need to clean the contacts with a soft cloth or a cotton swab dipped in some rubbing alcohol. Gently wipe the contacts until they are clean and dry. Be careful not to use too much alcohol or water, as this may damage your earbuds or case.
A third reason could be that the earbuds are not properly seated in the case. Sometimes, the earbuds may not be aligned with the charging contacts inside the case, which can prevent them from charging or turning off. To fix this, you need to gently press down on each earbud until you hear a click sound. This means that the earbuds are securely connected to the case. You should also see a red LED light on each earbud when they are charging, and a green light when they are fully charged.
A fourth reason could be that the earbuds or the case have a software issue. This can cause them to malfunction or not respond. To fix this, you need to reset your earbuds and your case by following these steps:
Remove the earbuds from the case and manually power them off by touching and holding both buds for four seconds. Once both buds are off, touch and hold each bud for 10 seconds to completely reset them. This will power cycle them on and off again. Once both buds have gone through the power cycle, place them back in the case until both LEDs show red, and then pull them back out. Both buds will automatically power on and sync with each other. You will hear a tone to indicate that the sync was successful and only the left bud will flash red/blue. At this time, turn on your device’s Bluetooth and look for Sesh Evo in your list of available devices. Select it and follow any prompts that appear on your screen. Once successfully paired, you will hear a voice prompt that says “Connected”.
Conclusion
Skullcandy Sesh Evo is a great wireless earbud that can enhance your listening experience. However, you may miss out on their features and benefits if they are not charging properly. Following these simple tips, you can troubleshoot and fix this issue and enjoy your music or podcasts without hassle.
